| Quantity: | |
|---|---|
Avoid direct contact with steel or copper without insulation—galvanic corrosion may occur.
Torque values must be reduced compared to steel bolts (typically 30–50% lower).
Not rated for structural or safety-critical joints due to low yield strength.
To minimize weight while maintaining dimensional stability, an M12×12 mm aluminum 6063-T5 hex bolt was employed in the test fixture. Although not suitable for high-tensile loads, the bolt provided sufficient clamping force for the low-stress assembly.
Avoid direct contact with steel or copper without insulation—galvanic corrosion may occur.
Torque values must be reduced compared to steel bolts (typically 30–50% lower).
Not rated for structural or safety-critical joints due to low yield strength.
To minimize weight while maintaining dimensional stability, an M12×12 mm aluminum 6063-T5 hex bolt was employed in the test fixture. Although not suitable for high-tensile loads, the bolt provided sufficient clamping force for the low-stress assembly.
